|
Post by wingrider on Oct 23, 2013 19:38:19 GMT -5
Trying to load your Mod on our servers cause it appears to be an Awesome Mod. Keep getting joined timeout errors even if I go IP direct connect. Tried several tracks same problem... Myrtl Beach loaded ok but pace car doesn't move on race start and yellows don't come out. Any ideas I sure would appreciate cause my drivers are looking for a good late model mod and I appreciate all the work you Modders do for us! Wing www.scol.org
|
|
|
Post by Brian Johnson on Oct 23, 2013 21:52:52 GMT -5
Hello, The mod is not setup to force rolling starts so that must be forced by the way you set up the server or the offline settings if your running offline, that might be causing the pace car not moving. As far as the join timed out issue, we know of 3 leagues that run the mod with no problems, so something might have not downloaded or installed correctly, also did you install the mod as a standalone? The mod is a standalone and causes problems if installed directly to your main rFactor.
Let me know if any of this helps/resolves any of the issues.
|
|
|
Post by wingrider on Oct 24, 2013 7:11:52 GMT -5
Thanks Brian. After several attempts we do get into the game with no join timeouts. We'll keep workin on getting use to it. I have our server set up for "Rolling Starts" is that correct or use Track Default?
|
|
|
Post by Brian Johnson on Oct 24, 2013 11:21:28 GMT -5
Hi, You would want to make sure you always have the server setup for rolling starts as the track default is standing. The reason you may have issues at Myrtle Beach is because the pace car is parked at the end of pit road I believe, so your starting a little way back from it and sometimes cant see when it pulls off pit road.
|
|
|
Post by wingrider on Oct 24, 2013 19:04:58 GMT -5
Thanks again for the response Brian. We wewre right up on the pace car and it never moved even when we decided to go ahead on the track, laps started counting but no announcement of green flag. I'll go back and check another load of myrtle and see if it worked better with rolling start. cant remember where I had it at the time!
|
|